Ok, admittedly I am a little biased. I have worked with the BIA since day one - and I do mean day one! I have always thought that the Bind-it-All is a clever crafting tool - so much versatility, and even after all these years, my original tool is still going strong. I my Bind-it-All all the way!
So when a competitive tool was introduced earlier this year, I was skeptical, but open-minded. But, after taking one for a test scrap this weekend, I am not only still (very)skeptical, but thoroughly convinced that nothing comes close to what the Bind-it-All can do (and with quality and consistency).
BINDING: I work in advertising, so I appreciate and understand the power of comparative marketing. But this is as close as I can get to the "Pepsi Challenge" of punching and binding. I used both tools side by side to make a few different projects. This is what I got: UGH!
Egg-shaped owires - I had nothing but problems with the owire closure.
No matter how many times I tried, the pre-set owire settings on the Cinch failed to create a nicely shaped "o" for the owire. If you watch the video, you can see some of my many attempts. The Bind-it-All in contrast has micro-adjustment settings. You can set the tool for proper owire sizes and then adjust in small increments if you desire a tighter or looser owire closure. I am a stickler for nice "o" shapes, so hands down this lack of function is a big red NO for me. I got rather frustrated while shooting the video, as I went through a boat load of owire trying to get it to work for me. I did give it a good try, even more times off camera. But, it does illustrate how much better the Bind-it-All is for getting the correct outcome.
PUNCHING: There is a difference between the two tools in the engineering of the punching action. No doubt some will find it easier to punch with a larger handle on the Cinch, with materials laying flat rather than the Bind-it-Alls vertical format. The Cinch handle got in my way a little bit - but that could just be me. But it did feel like by my holding the material in place in the flat position, the handle would get in the way. It's a matter of preference - and I have no problem doing punching with my BIA. In fact, the punching action on the BIA makes a point to keep fingers out of the way of the handle and the punching action. What also bothers me with the Cinch punch are the round shaped holes. They look out of proportion to me, even more so on smaller punched projects. Again, this is a matter of preference, but they just look too big....
Lastly, with regards to punching. The Bind-it-All does have variable punching settings - one that allows for the professional binding of "inner pages". As you can see on the Bind-it-All bound book - with the white inner pages - there is a nice overhanging of the covers. This is a punching option on the Bind-it-All (use "C" and "D" stop guide settings) that the other tool does not have. It's another nice versatility plus for the BIA.
So versatility and customizability - hands down the BIA ranks best!
Which brings me to owire........
OTHER STUFF: Then there are the other issues, like size, weight, and general bulkiness. I know scrappers are generally tool lovers, but for me and others I know, space and convenience are an issue....so who wants bigger and heavier when the Bind-it-All does more with less space and weight (and for less $ too). Really? $99.99 for that one, and the Bind-it-All for 25% less!!!
the Bind-it-All! The BEST!
If you've tried both, would love to know what you think. If you love your BIA, tell me that too :)